|
|
|
| |
| |
| |
| |
Presenting
Sbach Xtremeair 300
 |
Mission
|
| Single seat all-out unlimited and freestyle acrobatic aircraft! |
|
|
Structure
|
Fuselage shells, wing, all control surfaces and stabilizer are made of
high-tech carbon/honeycomb sandwich, manufactured in a wet layup method.
Surface protection is peformed by high quality acrylic paint.
Engine mount and control system is aircraft steel 1.7734.5
The whole airplane was designed using modern 3D-CAD, all of our tooling was
CNC-routed.
All composite parts are fabricated in precise female molds to secure perfect
symmetry and fit. |
|
|
Controls
|
Stick and rudder controls, aileron and elevator control are actuated via
carbon tubing.
Flettner-type elevator trim.
Hydraulic wheel brakes are actuated via toe pedals.
Engine (Throttle, Propeller and Mixture) are controlled via push-pull cables
and very cool quadrant.
|
|
|
Wing
|
Symmetrical wing, airfoil strake of own development for crisp snaps and high
cruise speeds.
For best possible safety the wing is a one piece double box main spar from
wing tip to wing tip.
Each aileron is hinged on 5 points, and is equipped with spades to reduce
control forces and enhance handling.
|
|
|
Empennage
|
Stabilizer and fin use the same symmetrical laminar flow airfoil.
All control surfaces can be easily removed for transportation and inspection
in about 2 hours with two people.
All control surfaces are statically balanced according to flutter evaluation
performed by Prof. Dr. Norbert Niedbal.
|
|
|
Fuselage
|
Specially molded “competition seat” available, individually fitted for each
pilot.
Canopy opens to the right hand side, an emergency jettison system is
installed.
The rudder pedals are adjustable.
The seat is equipped with a 5-point aerobatic harness system.
|
|
|
Landing Gear
|
The aircraft is a fixed gear taildragger.
The main gear struts are steel
spring type.
Tailwheel is mechanically linked to the rudder pedals, the wheel is solid
rubber, 100 x 50 mm.
Mainwheels are 5 x 5.00 tyre size with hydraulic brakes.
|
|
|
Engine
|
Either the Lycoming Thunderbolt AEIO 580 L1B5 or 540 variant are available.
Christen Inverted Oil System
Dual oil cooler system
|
|
|
Fuel system
|
All fuel cells are composite, protected and sealed with a special certified
tank sealer.
Aerobatic tank in forward fuselage, containing 65 Liters (17 US Gals.),
including a header tank with a flop tube to prevent fuel starvation in fun
attitudes.
For cross country flying each wing has a fuel cell near the root, containing
80 Liters (21.1 US Gals.) each.
Fuel selector switch shows „left“, „Acro“, „right“ and “Off“.
|
|
|
Propeller
|
MT Three blade mtv 9, hydraulically actuated constant speed, 203 cm
diameter.
Governor is made by MT.
|
|
|
Line Drawings
|
|
|
|
| |
| WING SPAN |
7,50 m / 24.6 ft |
| WING AREA |
11,25 m2 / 121.25 sq.ft |
| ASPECT RATIO |
5 |
| STABILIZER / ELEVATOR SPAN |
3,20 m / 10.5 ft |
| STABILIZER / ELEVATOR AREA |
2,98 m2 / 32.1 sq.ft |
| LENGTH OVERALL |
6,30 m / 20.6 ft |
| HEIGHT OVERALL, GROUND ATTITUDE |
2,3 m / 7.5 ft |
|
|
| MAX. LEVEL SPEED IAS @ 300 ft. |
Powersetting 100% |
|
| |
Powersetting 75% |
|
|
| ROLLRATE |
380°/second |
| STALLSPEED |
51 kts |
| BEST CLIMB SPEED |
75 kts |
| RATE OF CLIMB |
3500 ft/min |
| SPEED FOR BEST ANGLE OF CLIMB |
100 kts |
| SERVICE CEILING |
20.000 ft |
| TAKE OFF OVER 50 ft OBSTACLE |
230 m / 750 ft |
| LANDING OVER 50 ft OBSTACLE |
380 m / 1250 ft |
| RANGE |
700 NM |
|
|
| EMPTY WEIGHT |
530 kg / 1170 lbs |
| MAX. TAKE OFF WEIGHT |
"Aerobatic" |
|
| |
"Utility" |
|
| 650 kg / 1430 lbs |
|
| 750 kg / 1650 lbs |
|
|
|
| COMPLIANT TO |
C23 Experimental category |
| |
| "Aerobatic" for aerobatic flight +/-10G |
|
| "Utility" for cross-country flights +4,4G / -2G |
|
|
|
| VNE |
225 kts |
| VA |
162 kts |
| VC |
180 kts |
| VD |
240 kts |
|
|
|
| SBACH 300 Airframe Kit |
Airframe Kits include: fuselage, wing, stabilizer, engine cowling with oil coolers, ailerons, elevator, rudder, canopy frame with tinted plexi-glass installed, carbon seat, landing gear,
wheel and gear fairings, Grove heavy duty 500x5.00 wheels, tires and dual piston brakes, engine mount, flight controls and cables, Hooker Harness 5 point system, tuned exhaust system, 3 tank fuel probe kit.
Condition: All surfaced parts primered and guide-coat sanded to 320 grit, entire airframe has been pre-assembled, post cured, and rigged in factory. Flight controls assembled and pre-rigged. Engine mount and landing gear assembled. Canopy lock assembled and mounted. Canopy glass glued in, landing gear fairings pre-mounted, harness hard-points installed. Each and every airframe is load tested to meet certified requirements. |
$ 238,000 |
|
|
| Thunderbolt 540 |
AEIO-540-L1B5
300 Horsepower @ 2700 RPM
Includes:
- Volumetric Cylinder Balancing
- Inverted Aerobatic kit
|
$ 57,200 |
| Thunderbolt 580 |
AEIO-580-B1A (8.9:1)
320 Horsepower @ 2700 RPM
Chrome Rocker Box Covers
Includes:
- Volumetric Cylinder Balancing
- Inverted Aerobatic kit
|
$ 66,088 |
Thunderbolt 580
High Performance |
AEIO-580-B1A (10:1)
330 Horsepower @ 2700 RPM
Chrome Intake Pipes, R.B.C. and Shroud Tubes
Includes:
- 10:1 Pistons
- Volumetric Cylinder Balancing
- Dyno calibration Power Check
- Inverted Aerobatic kit
|
$ 73,640 |
VFR Instrument
and
Electonics Package |
Includes:
- Airspeed
- Altimeter
- Dynon engine monitoring system
- Digital G meter
- Digital Com Radio
- Transponder
- 406 ELT
- Garmin 496
- B&C Electrics
- Starter Alternator and Regulator
- Light Speed Electronic Ignition (custom configuration available)
|
$ 14,250 |
| MT Propeller |
MT Three blade MTV-9-B-C/C203-20d,
hydraulically actuated constant speed,
203 cm diameter.
|
$ 11,875 |
| |
Composite Spinner |
$ 1,728 |
| |
P-880-5 Governor |
$ 2,215 |
Custom Paint
design and finish |
Up to three color paint design by Aircraft Studio Design [www.aircraftstudiodesign.com]
Additional colors available for additional costs.
|
$ 9,200 |
Sbach Completion
and Certification |
SLO Air will assemble airframe, wire electrical systems, manage paint completion and assist customers in certifying and test flying their aircraft |
$ 12,500 |
|
|
| Smoke System |
High output smoke system with carbon 7 gallon tank |
$ 5,100 |
| Fitted Cover |
Custom Bruce canopy cover |
$ 650 |
| Carbon Sighting Device |
Removable Carbon wing sighting device |
$ 680 |
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
